|
教育背景
|
2003.01-2005.12，西安交通大学博士后
1997.09-2002.11，大连理工大学 工程力学系 博士研究生
1994.09-1997.07，大连铁道学院 机械工程研究所 硕士研究生
1990.09-1994.07，大连铁道学院 机车车辆系 本科
|
|
工作履历
|
2023.3-至今 大连交通大学党委副书记、校长
2018.10-2023.2，大连交通大学党委常委、副校长
2018.06-2018.10，大连交通大学 教务处 处长
2013.06-2018.06，大连交通大学 交通运输工程学院 院长
2006.01-2013.06，大连交通大学 交通运输工程学院 副教授 教授
|
|
学术兼职
|
1.铁道学会 副主任编委，2025.10—至今
2.辽宁省力学学会 常务理事 2024.08—至今
|
|
承担科研项目情况
|
1.国家自然科学基金项目：仿生梯度多胞吸能结构的跨尺度设计及增材制造，2023-2027。
2.中国国家铁路集团有限公司项目：基于增材制造的动车组吸能元件设计及仿真验证技术研究，2020-2023.
3.铁道部科技研究开发计划：八轴货运电力机车技术提升技术研究——HXD2型机车转向架焊接构架强度仿真分析，2019-2022.
4.大连市重点学科重大课题：高铁及城轨焊接结构抗疲劳设计多功能平台开发，2019.1-2021.12。
2.国家自然科学基金项目：基于材料和结构一体化的高速列车吸能部件的抗撞性分析和优化，2013.01-2016.12。
3.国家重点研发计划项目：轻量化材料复杂构件结构优化仿真技术研究, 201 6.07-2019.06。
4.铁路总公司科研计划课题项目：基于模块化技术的多级可控能量吸收系统的吸能机理分析和优化, 2015.06-2017.12。
5.国家自然科学基金项目：基于低频振动条件下的骨缺损在体力学模型研究, 2013.01-2016.12。
6.企业单位委托科技项目：神华货车轴承高可靠性技术研究与全寿命周期管理项目--数据平台建设，2022-2023.
7.企业单位委托科技项目：高速铁路轮轨表面粗糙度测试分析，2022-2023.
8.企业单位委托科技项目：高原双源动力集中动车组内燃动力车耐碰撞计算，2020-2022.
9.企业单位委托科技项目：基于耐撞性需求防爬吸能装置开发，2023-2025.
10.企业单位委托科技项目：动车组撞泥石流脱线行为仿真研究，2023-2024.
11.企业单位委托科技项目：车体钢结构静强度、刚度及模态仿真分方析，2023-2024.
12.企业单位委托科技项目：台州市域铁路S1线一期工程车辆项目转向架构架建模及关键部件静强度、疲劳强度分析，2022-2025.
13.企业单位委托科技项目：高速飞行状态下起落架收放气动特性研究，2024-2025.
14.企业单位委托科技项目：基于司乘人员保护的司机室结构与列车吸能结构一体化技术研究，2024-2026.
15.企业单位委托科技项目：动集耐撞性关键技术研究，2025-2029.
16.企业单位委托科技项目：新一代拖车（客车）技术研究，2024-2025.
17.企业单位委托科技项目：太原市轨道交通2号线一期工程车辆碰撞计算，2019-2020。
18.企业单位委托科技项目：内电共平台机车耐碰撞分析计算，2019-2020。
19.企业单位委托科技项目：尼日利亚阿布贾城铁一期工程车辆碰撞计算，2019-2020。
20.企业单位委托科技项目：适用于干线铁路的时速160Km城际列车项目碰撞计算，2019-2020。
|
|
奖励与荣誉
|
1.陈秉智、李永华、王悦东、张旭、王剑、邱广宇、兆文忠，轨道车辆车体机构耐撞性分析和可靠性优化关键技术，辽宁省科学技术二等奖，2018年
2.陈秉智，贯彻国家发展战略，面向国家重大需求，研究生创新能力培养模式探索与实践，辽宁省教学成果奖（研究生类）一等奖，2018
3.陈秉智，可靠预测轨道车辆焊接结构疲劳寿命的虚拟疲劳试验技术与工程应用，辽宁省科学技术三等奖，2015年
4.陈秉智，现代轨道车辆工程专业卓越工程师培养的研究与实践，辽宁省教学成果一等奖，2012年
5.辽宁省百千万人才工程百层次人选，2015年
6.辽宁特聘教授，2018
7.大连市第二届最喜爱的青年教师，2013年
8.辽宁省高等学校优秀班主任（导师），2012年
9.大连交通大学个人先进标兵，2009年
|
|
学术成果
|
[1]Y. W. Zhang, J. X. Zhou, R. X. Qin, S. S. Shi, Y. Z. Lu, X. Zhang, J. X. Xu and B. Z. Chen, Defect analysis and quality evaluation system for additive manufactured continuous fiber-reinforced polymer composites, JOURNAL OF MANUFACTURING PROCESSES, vol. 141, pp. 595-612, 2025.
[2]Z. Y. Wang, J. X. Zhou, Y. Z. Lu, D. M. Li, D. Y. Yue, X. Zhang and B. Z. Chen, Mechanical properties and energy absorption of CoCrNi functionally graded TPMS cellular structures, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, vol. 34, pp. 2772-2787, 2025.
[3]X. Wang, S. Y. Wang, M. H. Huang, R. X. Qin and B. Z. Chen, Multifunctional strut-plate composite lattice metamaterial for integrated acoustic, energy, and vibration management, VIRTUAL AND PHYSICAL PROTOTYPING, vol. 20, pp. 2025.
[4]H. Z. Niu, J. M. Lu, R. X. Qin, X. Wang, Q. J. Li, T. Y. Li and B. Z. Chen, A self-locked chiral honeycomb: In-plane compression behavior and energy absorption, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, vol. 111, pp. 2025.
[5]J. M. Lu, Q. J. Li, R. X. Qin, X. Wang, T. Y. Li, H. Z. Niu and B. Z. Chen, Enhanced energy absorption of assembled honeycomb system under in-plane compression, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol. 299, pp. 2025.
[6]M. H. Huang, X. Wang, R. X. Qin and B. Z. Chen, Crashworthiness Prediction and Optimization of Rib-Reinforcement Multi-Cell Tubes Based on Machine Learning Under Axial and Lateral Loadings, INTERNATIONAL JOURNAL OF APPLIED MECHANICS, vol. 17, pp. 2025.
[7]L. Ding, Z. He and B. Chen, Strength assessment and lightweight optimization design of a bogie frame based on the structural stress method, International Journal of Structural Integrity, vol. 16, pp. 159-186, 2025.
[8]Y. W. Zhang, S. S. Shi, Y. Z. Lu, R. X. Qin, X. Zhang, J. X. Xu and B. Z. Chen, A materials informatics framework based on reduced-order models for extracting structure-property linkages of additively manufactured continuous fiber-reinforced polymer composites, POLYMER COMPOSITES, vol. 45, pp. 6914-6932, 2024.
[9]X. Zhang, T. Y. Guan, D. M. Li, X. C. Cui and B. Z. Chen, Effect of Cladding Fe-Based Coating on the Microstructure, Wear Resistance, and Dynamic Performance of CL60 Steel, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, vol. pp. 2024.
[10]Z. Y. Wang, D. Y. Yue, D. M. Li and B. Z. Chen, Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol. 135, pp. 2173-2189, 2024.
[11]X. Wang, R. X. Qin, J. M. Lu, M. H. Huang, X. Zhang and B. Z. Chen, Laser additive manufacturing of hierarchical multifunctional chiral metamaterial with distinguished damage-resistance and low-frequency broadband sound-absorption capabilities, MATERIALS & DESIGN, vol. 238, pp. 2024.
[12]R. X. Qin, X. Wang, J. M. Lu, Q. J. Li, H. Z. Niu, X. Zhang and B. Z. Chen, Node-locked multi-cell honeycomb for efficient energy absorption, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol. 268, pp. 2024.
[13]H. Y. Lv, B. Z. Chen, S. S. Shi and Z. C. Wen, Minimum mass optimization of curved grid-honeycomb sandwich panels with cutouts under buckling constraints, STRUCTURES, vol. 63, pp. 2024.
[14]J. M. Lu, X. Wang, R. X. Qin and B. Z. Chen, Design of energy-absorbing bionic workstation table for trains and research on occupant collision injury, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, vol. 29, pp. 1118-1132, 2024.
[15]D. M. Li, X. Zhang, R. X. Qin and B. Z. Chen, Crashworthiness analysis and uncertainty optimization of novel multi-wall tube, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, vol. 29, pp. 151-162, 2024.
[16]J. X. Zhou, C. Dong, B. Z. Chen, R. X. Qin and D. M. Li, Out-of-plane crushing performances of cell-based hierarchical honeycombs based on the evaluation criteria for ideal energy absorption, THIN-WALLED STRUCTURES, vol. 182, pp. 2023.
[17]D. Y. Yue, R. X. Qin, D. M. Li, Z. Y. Wang, X. Zhang and B. Z. Chen, Numerical investigation of block support structures with different dimension parameters in laser powder bed fusion of AlSi10Mg, RESULTS IN PHYSICS, vol. 44, pp. 2023.
[18]J. X. Xu, H. Fan, D. L. Du, D. M. Li and B. Z. Chen, Light-transmitting AlON carrier with enhanced photocatalytic degradation performance, CERAMICS INTERNATIONAL, vol. 49, pp. 24762-24770, 2023.
[19]X. Wang, R. X. Qin, X. Zhang and B. Z. Chen, Quasi-static and dynamic behavior of additively manufactured metamaterial structures with layered-hybrid topologies, THIN-WALLED STRUCTURES, vol. 183, pp. 2023.
[20]X. Wang, R. X. Qin and B. Z. Chen, Crashworthiness reinforcements of multi-cell thin-walled tubes through topology optimized lattice structures under axial and lateral loadings, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, vol. 30, pp. 3662-3686, 2023.
[21]X. Niu, X. Wang, Y. Z. Lu, X. S. Zhang and B. Z. Chen, Greatly improving the energy absorption capacity of pre-folded tubes via non-uniformizing structures, ACTA MECHANICA SINICA, vol. 39, pp. 2023.
[22]D. M. Li, X. Zhang, R. X. Qin, J. X. Xu, D. Y. Yue and B. Z. Chen, Influence of processing parameters on AlSi10Mg lattice structure during selective laser melting: Manufacturing defects, thermal behavior and compression properties, OPTICS AND LASER TECHNOLOGY, vol. 161, pp. 2023.
[23]J. X. Zhou, C. Dong, Z. Y. Wang, B. Z. Chen, R. X. Qin and X. Niu, Approaching ideal energy absorption through the multicellular structure with gradient material distribution, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol. 225, pp. 2022.
[24]Y. Yu, D. P. Wang, G. Z. Zhao, Y. H. Li and B. Z. Chen, Size optimization of mid-frequency vibro-acoustic systems in the framework of modal energy analysis, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, vol. 65, pp. 2022.
[25]J. X. Xu, D. L. Du, X. C. Pan and B. Z. Chen, Effect of carbon and a-Al2O3 on controlled synthesis of AlON powder, CERAMICS INTERNATIONAL, vol. 48, pp. 16764-16772, 2022.
[26]J. Xu, X. Zhang, D. Li and B. Chen, Regulation of crystal defect concentration in AlON, Materialia, vol. 26, pp. 101622, 2022.
[27]Z. Y. Wang, Y. Z. Lv, B. Z. Chen and J. X. Zhou, Research Progress of Additively Manufactured Energy-Absorbing Structures, RARE METAL MATERIALS AND ENGINEERING, vol. 51, pp. 2302-2315, 2022.
[28]X. Wang, R. X. Qin, B. Z. Chen, X. Niu and J. X. Zhou, Multi-scale collaborative optimization of lattice structures using laser additive manufacturing, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol. 222, pp. 2022.
[29]X. Wang, R. X. Qin and B. Z. Chen, Crushing analysis under multiple impact loading cases for novel tailored-property multi-wall tubes, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, vol. 27, pp. 1092-1110, 2022.
[30]X. Wang, R. X. Qin and B. Z. Chen, Mechanical properties and energy absorption capability of a topology-optimized lattice structure manufactured via selective laser melting under axial and offset loading, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, vol. 236, pp. 10221-10236, 2022.
[31]Y.-Q. Shi, R.-X. Qin and B.-Z. Chen, Crashworthiness design and analysis for novel multi-corner square columns under axial loading, Mechanics of Advanced Materials and Structures, vol. 29, pp. 5843-5859, 2022.
[32]D. M. Li, R. X. Qin, J. X. Xu, J. X. Zhou and B. Z. Chen, Improving Mechanical Properties and Energy Absorption of Additive Manufacturing Lattice Structure by Struts' Node Strengthening, ACTA MECHANICA SOLIDA SINICA, vol. 35, pp. 1004-1020, 2022.
[33]D. M. Li, R. X. Qin, J. X. Xu, J. X. Zhou and B. Z. Chen, Topology optimization of thin-walled tubes filled with lattice structures, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol. 227, pp. 2022.
[34]D. M. Li, R. X. Qin, J. X. Xu, B. Z. Chen and X. Niu, Effect of heat treatment on AlSi10Mg lattice structure manufactured by selective laser melting: Microstructure evolution and compression properties, MATERIALS CHARACTERIZATION, vol. 187, pp. 2022.
[35]J. X. Zhou, C. Dong, B. Z. Chen and X. Niu, Design and Numerical Simulation of Pyramidal Prefolded Patterned Thin-Walled Tubes, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, vol. 2021, pp. 2021.
[36]X. Wang, R. X. Qin and B. Z. Chen, Laser-based additively manufactured bio-inspired crashworthy structure: Energy absorption and collapse behaviour under static and dynamic loadings, MATERIALS & DESIGN, vol. 211, pp. 2021.
[37]R. X. Qin, X. Wang, F. Gao and B. Z. Chen, Energy absorption performance of hexagonal multi-cell tube with hierarchy under axial loading, THIN-WALLED STRUCTURES, vol. 169, pp. 2021.
[38]X. Niu, R. X. Qin, Y. Z. Lu and B. Z. Chen, Energy Absorption Behaviors of Laser Additive Manufactured Aluminium Alloy Thin-Walled Tube Tailored by Heat Treatment, MATERIALS TRANSACTIONS, vol. 62, pp. 278-283, 2021.
[39]D. M. Li, R. X. Qin, B. Z. Chen and J. X. Zhou, Analysis of mechanical properties of lattice structures with stochastic geometric defects in additive manufacturing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 822, pp. 2021.
[40]R. X. Qin and B. Z. Chen, Optimization Design on Functionally Graded Cem for Trains Based on LPM Model with Calibrated Parameters, SHOCK AND VIBRATION, vol. 2020, pp. 2020.
[41]Q. Gong, B. Z. Chen, Y. H. Li and P. P. Zhi, Reliability Assessment Based on GO Method of Metro Traction System, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, vol. 2020, pp. 2020.
|
|
